黄色免费视频

Product display PRODUCTS

Your current location: home page > Product display > Capping machine > Small capping machine >DZ5 / 500 small capping machine
Small capping machine
Product time: June 2, 2020
This machine is a desktop three knife cyclone capping machine. The table is covered with stainless steel plate, clean, corrosion-resistant and easy to clean. The capping cutter head is processed with high-quality steel, and the surface is quenched, so it is durable. During the operation, the capped bottle does not rotate, and 120? Three whirlwind knives are evenly distributed for capping and sealing. The handle is designed as a spring structure. The distance between the three knives can be adjusted. The adaptability is strong. The capping yield is high. The motor cover is also made of stainless steel cover. This machine is an ideal choice for hospitals, laboratories and small pharmaceutical factories.
characteristic:
 
The safety belt is adjustable and reliable;
 
2. The working table adopts the bell mouth clamping type self centering, and the glass bottle can be put in, and the operation is simple. If the glass bottle of different specifications needs to be pressed, it is only necessary to replace the bell mouth of corresponding specifications and clip it into the worktable;
 
3. All stainless steel platen and cover are adopted, which are clean and sanitary, stable and reliable;
 
4. In the same electric Capping machine, aluminum (plastic) capping of various specifications and models can be carried out with high cost performance ratio.
 
usage method:
 
A. adjustment of upper arm of electric Capping machine when rolling bottles of different specifications
 
The electric Capping machine can be used to roll 5-500ml bottle caps. When using bottles of any size, just put the bottles of this size on the tray, hold the cross arm with one hand, and loosen the nut on the left side of the cross arm with the other hand to make the cross arm drop or rise. When the capping head and the bottle cap are about 20 mm in position, tighten the nut, and then use the Allen wrench to hold the supporting ring close to the cross arm Lock the supporting ring behind the arm. (note) pay attention to the alignment between the capping head and the bottle cap when tightening.
 
Adjustment of B and V type support block
 
Put the bottle into the lower V-shaped support, loosen the two screws on the support block, move the bottle and the lower V-shaped block together until the capping head is aligned with the bottle cap, and then tighten the two screws on the V-shaped block.
 
C. specific operation method
 
1. Put the bottle filled with liquid and cover on the lower tray, lean against the V-shaped support block, hold the bottle with one hand, and tighten the handle with the other hand backward and downward. At this time, the tray holds the bottle up until the bottle cap and the capping head are pressed tightly.
 
2. After the bottle cap and the capping head are pressed tightly, the three capping cutters that are continuously rotating rotate for several turns, and then the bottle cap is rolled tightly. (note) the motor must run clockwise.
 
3. Push the handle forward to make the cover of the rolled cap return to its original position with the tray. The whole operation process is completed. Repeat the above operation for each bottle cap rolling.
 
D. adjustment of capping head
 
It is equipped with multiple capping heads, which can be selected according to the size of different bottle caps. Try it with a bottle before use.
 
1. If the cover is not tightly rolled, loosen the locking nut of the capping head, screw out the upper capping head anticlockwise, and then lock the fixing nut.
 
2. The cap is rolled too tightly, and the bottle cap is peeled. The locking nut of the upper rolling head can be unscrewed, and then the upper fixing nut can be locked.
 
3. Parameters of DZ5 / 500:
 
1. Specifications: 6-33mm oral liquid bottles, penicillin bottles, infusion bottles and other glass bottles for sealing;
 
2. Production capacity: 20-40 bottles / min
 
3. Speed: 1400 rpm;
 
4. Motor power: 220 V / 180 W;
 
5. External dimension: 450 × 400 × 600mm;
 
6. Machine weight: 35kg;
 

Message box

  • Products:

  • Message content:

  • Your organization:

  • Your name:

  • contact number:

  • Common email address:

  • Detailed address:

  • province:

  • Verification Code:

    Please input the calculation result (fill in Arabic numerals), for example: three plus four = 7