This machine is a new type of equipment which can coat the surface of Chinese and Western medicine tablets, such as sugar coating, film coating, etc.
Product introduction
Small coaterPrice Small coaterPriceStructural features and working principle This machine is a new type of equipment for coating the surface of Chinese and Western medicine tablets, such as sugar coating and film coating. It integrates strong current, weak current, hydraulic pressure and pneumatic, and transforms the original common sugar coating machine.It is mainly composed of main machine (sugar coating machine), controllable normal temperature hot air system, automatic liquid supply and air supply spray system.The main motor can be adjusted by frequency conversion. It sprays the coating auxiliary materials onto the surface of the tablets by means of automatic control of electrical appliances. At the same time, the tablets make continuous and complex trajectory movement in the coating pot, so that the coating liquid is evenly wrapped on the tablet core. There is controllable room temperature hot air in the pot to dry the tablets at the same time, so that the surface of the tablets can quickly form solid, fine, complete and smoothSurface film. This machine is simple, easy to operate, one-sided smooth, bright, delicate, saving auxiliary materials, easy maintenance and other advantages, is an ideal experimental equipment.
PriceBasic technical parameters: Parameters of by-400a coater: 1. Coating pot diameter: 400mm 2. Production capacity: 2-5kg / time 3. Air temperature regulation range: normal temperature-80 ℃ 4. Speed regulation range of main engine: 0 ～ 46R / min 5. Main motor power: 0.55kw 6. Fan: 40W 7. Air compressor: self provided 8. Total heating power: 1.5kw 9. Solenoid valve: G1 / 8 " Maintenance 1. The lubricating oil in the gearbox and the grease in the inner cavity of rolling bearing shall be replaced regularly (generally no more than six months) 2. If the coating pot is not used for a long time, it should be cleaned and oiled. 3. After each shift, the spray gun should be pressurized with clean water to prevent plugging. In case of blockage, please disassemble the nozzle according to the instruction manual of the spray gun and remove the residue from the muzzle with a fine needle. 4. In order to ensure that the worm gear in the reducer meets the lubrication conditions of transmission, the temperature rise of the gearbox shall not exceed 50 ℃. 5. The oil proof sealing ring of worm shaft end should be inspected and replaced regularly (no more than six months). 6. The machine must be reliably grounded, and its grounding resistance should be ≤ 4 Ω. 7. Do not dismantle the electrical appliances at will.
