黄色免费视频

Product display PRODUCTS

Your current location: home page > Product display > Capping machine > Small capping machine >DZ5 / 500 small capping machine
Small capping machine
Product time: June 1, 2017
The machine is a table top three knife cyclone capping machine. The table is covered with stainless steel plate, clean, corrosion-resistant and easy to clean. The capping cutter head is processed with high-quality steel, and the surface is quenched, so it is durable. During the operation, the capped bottle does not rotate, and 120? Three whirlwind knives are evenly distributed for capping and sealing. The handle is designed as a spring structure. The distance between the three knives can be adjusted. The adaptability is strong. The capping yield is high. The motor cover is also made of stainless steel cover. This machine is an ideal choice for hospitals, laboratories and small pharmaceutical factories.

1 DZ5/500 Features of small capping machine:

1. DZ electric Capping machine can be adjusted up and down arbitrarily with locking device, which is safe and reliable;
2. The working table adopts the bell mouth clamping type self centering, and the glass bottle can be put in, and the operation is simple. If the glass bottles of different specifications need to be pressed, it is only necessary to replace the bell mouth of corresponding specifications and clip into the working table;
3. All stainless steel platen and cover are adopted, which are clean and sanitary, stable and reliable;
4. In the same electric Capping machine, various specifications and models of aluminum (plastic) capping can be carried out with high cost performance ratio.

 

  2 DZ5/500 Usage of small capping machine:

A、 Adjustment of upper arm of electric Capping Machine in rolling bottles of different specifications

Electric Capping Machine It can be used to roll 5-500ml bottle cap. When using any size of bottle, put the bottle on the tray, hold the cross arm with one hand, and loosen the nut on the left side of the cross arm with the other hand to make the cross arm drop or rise. When the capping head and the bottle cap are about 20 mm, tighten the nut, and then use the inner hexagon wrench to close the support ring to the cross arm, and then lock the supporting ring (note) pay attention to the alignment between the capping head and the bottle cap when tightening.

B、 Adjustment of V-shaped support block

Put the bottle into the lower V-shaped support, loosen the two screws on the support block, move the bottle and the lower V-shaped block together until the capping head is aligned with the bottle cap, and then tighten the two screws on the V-shaped block.

C、 Specific operation method

1. Hold the bottle on the top of the tray and press the bottle cap onto the bottom of the tray with the other hand holding the bottle head down.

2. When the bottle cap and the capping head are pressed tightly, the three capping cutters that are continuously rotating rotate for several turns, and then the bottle cap is rolled tightly. (note) the motor must run clockwise.

3. Push the handle forward to make the cover of the rolled cap return to its original position with the tray. The whole operation process is completed. Repeat the above operation for each bottle cap rolling.

D、 Adjustment of capping head

It is equipped with multiple capping heads, which can be selected according to the size of different bottle caps. Try it with a bottle before use.

1. If the cover is not tightly rolled, loosen the locking nut of the capping head, screw out the upper capping head anticlockwise, and then lock the upper fixing nut.

2. The lid is rolled too tightly, and the bottle cap is peeled. The locking nut of the upper rolling head can be unscrewed, and then the upper fixing nut can be locked.

 

3 DZ5/500 Parameters of:

1. Usage specification: 6-33mm oral liquid bottles, vials, infusion bottles, etc;

2. Production capacity: 20-40 bottles / min

3. Speed: 1400 rpm;

4. Motor power: 220 V / 180 W;

5. External dimension: 450 × 400 × 600mm;

6. Machine weight: 35kg;

 

Message box

  • Products:

  • Message content:

  • Your organization:

  • Your name:

  • contact number:

  • Common email address:

  • Detailed address:

  • province:

  • Verification Code:

    Please input the calculation result (fill in Arabic numerals), for example: three plus four = 7