黄色免费视频

  • Company news NEWS

    Your current location: home page > Company news >The adjustment of capping head is an indispensable content in the production process of capping machine

    The adjustment of capping head is an indispensable content in the production process of capping machine

    Release time: October 15, 2019 hits: 595
        Capping machine It is a special equipment used in pharmaceutical industry to fill antibiotics, biochemical drugs and other freeze-dried powder injection drugs by filling machine, freeze-drying machine, and then seal with aluminum cap. Stainless steel appearance, safe and convenient operation. When working, the capped bottle does not rotate. Three whirlwind knives with 120 ° are evenly distributed for capping. The handle is designed as a spring structure. The distance between the three knives can be adjusted. The adaptability is strong and the capping yield is high. This machine is an ideal choice for hospitals, laboratories and small pharmaceutical factories
    The capping machine is composed of motor, reducer, transmission gear, cap locking system, cap conveying system, bottle conveying transmission system, bottle discharging system, bottle feeding disc system, electric control box, frame and other components. Through the bottle to the top, the cutter wheel rotates but the bottle does not rotate. The uniform distribution is 120 ° and the three whirlwind knives rotate to roll and seal the cap, resulting in a certain upward force. The three knives automatically rotate and shrink inward to close, resulting in a certain force to tighten the lid, which is referred to as the hand-held capping machine. This machine can roll bottles of different heights by adjusting the height of cross arm. When rolling bottles of different specifications, only the capping head can be replaced.
    The adjustment of capping head is Capping machine An indispensable content in the production process, the adjustment mode is as follows:
    The capping head is equipped with a plurality of capping heads, which can be selected according to the size of bottle cap. Try it with a bottle before use.
    1. If the cover is not tightly rolled, loosen the locking nut of the capping head, screw out the upper capping head anticlockwise, and then lock the fixing nut.
    2. The cap is rolled too tightly, and the bottle cap is peeled. The locking nut of the upper rolling head can be unscrewed, and then the upper fixing nut can be locked.
    3. If the lower edge of the bottle cap is not tight, the eccentricity of the three rolling heads can be appropriately reduced according to the actual situation. If it is too tight and the bottle is crushed, the eccentricity of the three rolling heads can be appropriately increased.