黄色免费视频

  • Technical articles ARTICLE

    Your current location: home page > Technical articles >Reference factors of choosing and purchasing sugar coating machine

    Reference factors of choosing and purchasing sugar coating machine

    2017-24 hits: 1109
        Sugar coating machine It can also be used for rolling fried beans and fruit ripening. The utility model has the advantages of directly placing the sugar cooker under the sugar cooker, and being able to place the heating angle of the electric cooker directly. A separate electric blower is attached. The outlet pipe can be used for heating or blowing cooling, and the heat can also be adjusted.

     Sugar coating machine

    purchase Sugar coating machine We should not only look at the price of equipment, but also consider the comprehensive cost of equipment operation.
    1. Under the premise of the same specification to produce the same type of coated tablets, the suitable loading capacity of each batch of different manufacturers' sugar coating machines is different (for example, some of the same 150kg specifications of sugar coating machines can hold 180kg embryo tablets, some can only load 120kg embryo tablets), and the effective utilization rate of equipment is different, which also causes the difference of production costs.
    2. Under the premise of the same specifications, the same type of coated tablets are produced. Due to the different structure of the coating pots of different manufacturers, the first-time yield of the products is different (for example, one pot of 10 pots of coated tablets is reworked for some coating machines, and 9 pots of 10 pots of tablets are required to be reworked), the amount of coating powder consumed is very different, and the power and labor costs are also different The cost of coating production varies greatly.
    3. Under the premise of the same equipment specifications, the production rate of the same batch of coated tablets is different from that of different manufacturers (for example, for gastric coated tablets, it takes 1.5 hours for some, and more than 3 hours for some; for enteric coating, it takes 2.5 hours and more than 7 hours for enteric coated tablets), so that the costs of labor and power required to pack the same batch of coated tablets are different, resulting in serious differences in production costs.
    4. On the premise of the same equipment specifications and configuration, the prices of different manufacturers' sugarcoating machines vary due to different technologies and brands, resulting in different equipment depreciation and different production costs.
    5. Under the premise of the same specifications, the same kind of special-shaped coated tablets or coated tablets with characters are produced. Due to the different coating pot structure and flap baffle, the surface wear degree of the coated tablets is different, resulting in the same type of coating products. Some manufacturers can not pack the sugar coating machine, while some manufacturers can pack it (for example, the State Food and drug administration often draws When the erythromycin enteric coated tablets are coated, the technical details of the sugar coating machine are required to be very high), so if a product to be coated cannot be coated on the purchased sugar coating machine (the qualified product cannot be wrapped), the economic loss will be greater.
    In order to make the chip coated crystal evenly on its surface as soon as possible and achieve the purpose of polishing, it is necessary to spray syrup and mixed slurry on the chip in the pot by hand. Through clockwise rotation of the pan, the sugar coated tablets are rolled in the pan, and are evenly distributed on all chips by sliding friction and grinding. At the same time, hot air can be used to remove the surface water of the tablets quickly, and qualified sugar coated tablets and other finished products can be obtained after Zui. Sugar coating machine In order to meet the requirements of the process of thin coating and smooth coating, the process of forming the thin film of the sugar coating is stable.